Note: Not all classes are offered at every race. 

OPEN TOURING: The largest class in the classic. Non - competitive” participant category for canoes, kayaks and guideboats. No unlimited kayaks or amateur class canoes are permitted in open touring.  No age or gender divisions and no 1st, 2nd, or 3rd-place awards will be given. Participation plaques may be purchased. You are in it to finish. Times will be kept. This group of paddlers will start first each day and must make cut-off times to finish each day.

C-2 RECREATION: Maximum length - 17 feet, 6 inches. Weight - minimum of 55 pounds from the manufacturer. Race organizer discretion: If it looks like a racing canoe, it is not a recreational canoe. Any boats made specifically for racing are excluded from this class. 

C-2 STOCK: Included in this class are hulls similar to the Jensen 18. There are minimal concave lines in the hull and no concave lines in the gunwales. Maximum length is 18' 6'', no minimum weight. Minimum width at 4'' waterline is 15 percent of length (33 5/16'' for 18'6''). Tumblehome max is 1'' per side. All NYMCRA specifications apply. The current C-2 Stock list includes: Wenonah: Jensen 17, Jensen 18, Sundowner, Minnesota II, Monarch, Odyssey, Escape, and Escapade; GRB Newman Designs: Traveler 17' 5'', Traveler 18' 6'', Monarch; Mad River Lamoille, Horizon.; Bell Canoe Works Northstar, Northwind, and Northwoods; Savage River Works Susquehanna.

C-2 AMATEUR: NOTE: Included in this class are WENONAH SCR'S (Standard Class Racers); COMP cruisers; and 3 x 27's. If it looks like a racing canoe, it is. Specifications according to NYMCRA & USCA. these participants paddle regularly, frequently as training for races. 

C-2 FAMILY: Paddlers must be related, with one paddler 16 years of age or younger. Recreation or Stock boats only. 

C-1 AMATEUR: One person in a solo racing boat.  Specifications according to NYMCRA & USCA. 

C-1 STOCK:Maximum length - 17’ 0”, Tumblehome not to exceed 3.5” per side. No minimum weight. The current C-1 Stock list includes GRB Newman Designs Classic and Classic XL; Wenonah Advantage, Prism, Encounter and Solitude; Sawyer Summer Song, DY Special and Shock Wave; Savage River’s Otegan (modified) Bell’s Magic, and Mad River’s Independence.

STANDARD WAR CANOE:Minimum of 6 paddlers in a wooden canoe built to meet the following specifications: Maximum length 28’, Minimum width at gunwhales and 6” waterline 39”, Minimum depth of 14”. 

OPEN WAR CANOE: Minimum of 7 paddlers in a boat built to accommodate them - No restrictions!

C-4 STOCK CLASS : In an effort to make the competition about the team of paddlers and not the boat, organizers have identified the most readily available boats to base class specifications upon. Boats must weigh a minimum of 55 pounds, and be designed by the manufacturer to accommodate 4 paddlers.  Wenonah’s Minnesota 3 (with 4 seats) and Minnesota 4 are built
primarily for back country travel but perform admirably in a competitive event against similar craft. Boats of similar design to the Minn 3 and 4 will be inspected and must be approved by the boat judge. 

Boat hulls cannot be modified. Seat configurations can be redesigned to meet team needs. Bailers and spray skirts are allowed. Participants are required to use single bladed canoe paddles to power the craft. Rudders are not allowed. 

Specific hull measurements: C-4 Stock Class: 
A. Maximum length of 23’ 1", Minimum weight 55 pounds from the manufacturer. 
B. The boat must be specifically built by the manufacturer to accommodate 4 paddlers. 
C. Minimum width at the center line, at the 4" water line is 33", at both the gunwales and  4" waterline.
D. Minimum width at the 4" waterline - 4 feet in from the bow is 16", 4 feet in from the stern is 17". 
E. There is no concavity in the longitudinal axis of the hull (bow to stern) and no concavity in the cross section (side to side) 
below the 7" waterline. There are minimal concave lines in the hull and no concave lines in the gunwales. 
F. Minimum depths from the manufacturer: Bow = 20", Center = 13½", Stern = 17". 
G. No hard line transitions in the hull of the boat. Curve of chine must be equal to at least the radius of a softball. 
H. Maximum tumblehome of 2" per side.

C-4 Unlimited Class:  
 Maximum length of 25’ 11”, Minimum weight 50 pounds.  
 Boat must be built to accommodate 4 paddlers.  
Minimum width at the widest point from gunwhale to gunwhale is 32”.
No concavity along the length of the gunwhale from bow to stern. 
Minimum depth: Bow = 17”, Center =12 ½”, Stern = 13 ½”.
Paddlers must use canoe paddles.
One of a kind boats are permitted.
For the 90 Miler, There will be one C-4 unlimited class including men, women and mixed teams.

SOLO RECREATION:ANY CANOE OR SEA KAYAK of any material with a maximum length of 16’ 0” and a minimum width at the 4” waterline of 22”. Must use double bladed paddle.

TOURING KAYAK:Kayaks of any material with a maximum length of 20’ and a minimum width at the 4” waterline of 18”.

UNLIMITED KAYAK:Any kayak over 20’ in length and / or less than 18” in width at the 4” waterline.

TWO-PERSON KAYAK: Two people in any kayak. 


Length: 11 - 23 feet (15 to 17 standard)
Beam: 32 - 44 inches (Outside measurement: 34 to 38 inches is standard)
Bottom Board Outside Width: 4 - 10 inches.
Stem Height: 20  - 26 inches.
Depth Amidships: 11 - 13 inches.
Construction:  Traditional, Strip or mold construction; ribs may be laminated, hull may be wood, fiberglass, kevlar, or composite material, but must
conform to traditional guideboat shape and character
in the opinion of the boat judge.
Oars: Solid wood oars, maximum 8 foot length, 5 1/2 inches wide.
Hardware: Brass, bronze, or steel pins with 1/2 inch diameter hole to accept pin; may be bushed if out of round.
Use of wheels: is permitted in the Guideboat Class.
Footbraces: may be used.
Seats: Must be fixed, no rolling seats are allowed.
Oars and Paddles: may be laminated.
Hardware: Brass, bronze, or aluminum pins.
Footbraces: must be secured to the boat.
UNACCEPTABLE for the guideboat class:
·               Roller or sliding seats.
·               Roller, ball or needle bearings in hardware.
·               Outriggers.
·               Boats of design and or construction with pulled- in beams / ends.
·               Paddles and oars with cupped or spooned blades.
During an event, the guideboat must be propelled by rowing.  i.e. the rower can not exchange a paddle for the oars to negotiate Brown's Tract. 

Comments or clarification questions can be addressed to Brian McDonnell at or 518 891 2744.